show gs-service This chapter includes the show gs-service command output tables. show gs-service all show gs-service all Command Output Descriptions Field Description Service name The Gs service that is running in this session. State Status of the Gs service. Context The name of the context in which Gs service is running. SGSN Number The E.164 number for the SGSN to associate with the Gs service. SSN Indicates the subsystem number configured or not. If configured it indicates SSN. Self SCCP Network Id Indicates the SCCP network identifier configured or not. If configured it indicates SSCP network identifier. T6-1 Timeout Indicates the retransmission timer (T6-1) value to guard the location update. Default: 10 seconds Range: 10 to 90 seconds T8 Timeout Indicates the retransmission timer (T8) value to guard the explicit IMSI detach from the GPRS service procedure. Default: 4 seconds Range: 1 to 30 seconds T9 Timeout Indicates the retransmission timer (T9) value to guard the explicit IMSI detach from the non-GPRS service procedure. Default: 4 seconds Range: 1 to 30 seconds T10 Timeout Indicates the retransmission timer (T10) value to guard the implicit IMSI detach from the non-GPRS service procedure. Default: 4 seconds Range: 1 to 30 seconds T12-1 Timeout Indicates the retransmission timer value (T12-1) in minutes to control the resetting of SGSN-Reset variable procedure. Default: 54 minutes (plus 8 seconds for transmission delay) Range: 0 to 380 minutes T12-2 Timeout Indicates the retransmission timer (T10) value to guard the SGSN reset procedure. Default: 4 seconds Range: 1 to 30 seconds Max N8 Retries Indicates the maximum retransmission allowed for procedure for explicit IMSI detach message from GPRS service (N8). Default: 2 retries Range: 0 to 10 retries Max N9 Retries Indicates the maximum retransmission allowed for procedure for explicit IMSI detach message from non-GPRS service (N9). Default: 2 retries Range: 0 to 10 retries Max N10 Retries Indicates the maximum retransmission allowed for procedure for implicit IMSI detach message from non-GPRS service (N10). Default: 2 retries Range: 0 to 10 retries Max N12 Retries Indicates the maximum retransmission allowed for N12 procedure for sending BSSAP+ Reset Indication message (N12). Default: 2 retries Range: 0 to 10 retries GS Service Configurations LAC Id Indicates the subscriber location area code identifier configured in Gs service. Range: 1 through 65535 Pool Type Type of pool area (non-pool area or pool area) configured in Gs service. Possible values are: • Non Pool Area • Pool Area Pool Area/ Non Pool Area name Name of the configured Non-pool area or pool area in Gs service. Pool Area Configurations Pool Area Name Name of the configured pool area in Gs service. Default Vlr Name of the default VLR attached to this pool area. LAC in Pool Area Indicates the subscriber location area code identifier configured in this pool area. Range: 1 through 65535 VLR Hash Type Indicates the type of hash configured for this pool area. Possible values are: • Value • Range Value / Range Indicates the value of hash or range of hash. Vlr Name Name of the VLR attached to this pool area. Non-Pool Area Configurations Non-Pool Area Name Name of the configured non-pool area in Gs service. Vlr Name Name of the VLR attached to this non-pool area. LAC in Pool Area Indicates the subscriber location area code identifier configured in this non-pool area. Range: 1 through 65535 VLR Configurations VLR Name Name of the VLR attached to this Gs service. ISDN Numbe Indicates the E.164 ISDN number of configured VLR. SSN Indicates the subsystem number configured or not. If configured it indicates SSN. Point Code Indicates the configured point code address for VLR in SS7 address format.a SGSN Reset Indicates whether SGSN reset function is allowed or not. Possible values are: • TRUE • FALSE
